3D Printing  Nottingham Logo
3D Printing  Nottingham Logo
call 3d printing Nottingham
Send a message to 3d Printing Nottingham

3D printing, CAD design and prototyping

3D Printing Nottingham

Professional 3D printing for businesses, inventors and makers in Nottinghamshire and across the UK. We design your part from a file, drawing or photo, then print it in engineering plastics, resin or carbon-fibre composites.

Free, no-obligation quotes

CAD from drawings or photos

One-offs to small batches

Parts sent across the UK

Your local 3D print service

3D Printing Service in Nottingham

There are plenty of misconceptions about what 3D printing can and can’t do. We use professional-grade 3D printers rather than the hobby machines that sell for a few hundred pounds, so we can print in materials a home printer can’t handle, including carbon-fibre composites that give parts a high strength-to-weight ratio.

Most jobs start with a conversation. Our design team will tell you which material suits your part and why, whether it is a replacement for something that has broken, a model for a client presentation or a prototype of a new product.

We work with businesses and individuals in Nottingham and across Nottinghamshire, including Mansfield, Newark-on-Trent and West Bridgford, and further afield too. The house model shown here was printed for an architecture firm.

3D printed house model with a timber-effect frame, made for an architecture firm

What we do

3D Printing and Design Services

Design, printing and the routes to larger production runs, all from one team.

Commercial 3D printer with a part on the build plate

Parts printed on professional machines, not hobby printers, from a single replacement to a short production run.

3D CAD model of an engine assembly on a monitor

Our designers turn drawings, sketches, photos or a broken part into an accurate 3D model, and can often improve on the original.

Hand holding a white 3D printed prototype gear

Hold your idea in your hand within days, test it, change it and print again before you spend money on tooling.

Red plastic figure being 3D printed

Nylon, resin and composites reinforced with carbon fibre, Kevlar or fibreglass, matched to what the part has to do.

Two engineers checking a machined part

When a design suits machining better than printing, CNC machining is the next step after 3D design.

Plastic injection moulding machine

Once a printed prototype has proved the design, injection moulding makes higher volumes more cost-effective.

Getting something 3D printed

From Your Idea to a Finished Part

You don’t need a 3D file or any design software to get started.

1

Tell us about the part

What it is, where it will be used and its rough size. Use our contact form, or call us.

2

Send a file, sketch or photos

An STL or CAD file lets us cost the build straight away. No file? Photos next to a ruler work, and we draw a rough CAD model from them.

3

Agree the design and price

We recommend a material and give you a free quote. Where we have drawn the part, you approve the model before printing starts.

4

We print and send it

Printing takes from about 30 minutes for a small part to several days for a large one. The finished part is then sent to you.

Jay Dyer
Easy to deal with and really good advice in terms of help with creating a 3D CAD file and then advising on the materials to use. Would recommend.

Jay Dyer

November 2022

Dave Morris
Sam really helped me out on a project that was time sensitive. Fast and reliable service and very knowledgeable. Will be recommending and using there services again

Dave Morris

May 2022

Howard Shinn
I needed a shower screen bracket that had broken and was no longer available from the supplier of the screen.
I was able to send the broken bracket off so that a 3D image could be created and and a new bracket made.
The new item fitted perfectly and some months later it appears to be doing its job.
A fantastic service with very professional help from this company.

I would certainly use them again for a reasonably priced quality product.

Howard Shinn

September 2021

Antony Walster

Antony Walster

September 2021

Stuart Gorst
Just a note to say thanks for a great service with a quick turnaround and good price.
Managing to remanufacture parts that where initially made in China without drawings and with a specification improvement has saved me £1000’s. The parts are a great fit and are much more robust than the original.

Stuart Gorst

January 2021

3D printed moulds

3D Printed Moulds for Jewellery, Candles and Soaps

If you design your own pieces or make small batches, a 3D printed mould can be a quick way to produce them. Some moulds are used once, like the jewellery patterns shown here, printed in castable resin. The resin pattern forms the master for the cast: molten metal is poured in, the resin burns away, and the metal takes the exact shape of your design.

For candles and soaps, a silicone mould made from a 3D print can be used again and again, and because a new print is quick to make, it is easy to change the design for a limited-edition run. Tell us what you make and we will suggest how a printed mould could work for it.

Clear castable resin ring pattern resting on a pen
Clear castable resin ring pattern 3D printed for jewellery casting

Replacement parts

Replacing Parts That Are No Longer Made

Car makers don’t keep spares for classics forever, and machinery parts go out of production too. We have recreated obsolete wheel centre caps for a Jaguar owner, and remanufactured parts that were first made in China, without drawings, to an improved specification that has saved the customer thousands of pounds.

If you have the broken part, or enough of it to show its shape, our designers can model it in CAD and print a new one, often in a tougher material than the original. Find out more about 3D printed replacement parts.

Two 3D printed wheel centre caps for a classic Jaguar
Black 3D printed centre cap seen from the back

Nottingham based, UK wide

3D Printing for Businesses Across the UK

We have printed parts and models for engineers, architects, researchers and inventors, from Nottinghamshire and well beyond the East Midlands. A free, no-obligation quote from an STL file is quick to put together, wherever you are.

When a printed prototype proves the concept, we can also take it on to injection moulding for larger numbers.

Quotes

Free, from a file, drawing or photo

Quantities

One-off parts to small batch runs

Materials

Plastics, resin and composites

Projects

Engineering, architecture, research and product design

Our work

Parts and Models We Have Printed

A selection of recent jobs for customers in Nottingham and across the UK.

How our designers build a part in 3D CAD before it is printed.

Have something you need 3D printed?

Send us a file, a sketch or a few photos for a free quote, or call us Monday to Friday, 8am to 6pm.

Questions

Questions About 3D Printing in Nottingham

If your question isn’t answered here, get in touch.

STL is the most common 3D print file. We load it into our software, and once we know which material you want, we can quote. Other CAD formats are worth sending too, as we can often convert them.

Our contact form takes .zip files but not .stl files on their own, so zip your file before you attach it.

Yes, that is what our design team is for. We can create the file from 2D drawings, from the item itself, or even from a broken part if enough of it survives to show the shape and dimensions.

We draw new files rather than scanning, because we have found it gives clients more accurate files for less money.

As a rule of thumb, about the size of a shoebox in one go. For prototypes and some other jobs, we can print several parts and join them into one unit, which has made one-off prototypes possible where other methods would have cost too much.

It depends on the size and detail of the part. A small, simple object can take around 30 minutes, while a larger, detailed item can take several days. We give you an estimated time as part of your quote.

Nylon-based plastics, resins, and composites reinforced with carbon fibre, Kevlar or fibreglass for parts that need to be strong and light. We recommend a material once we know what the part has to do. See our materials page for more.

Yes. We print master patterns in castable resin for jewellery casting, and parts used to make silicone moulds for products such as candles and soaps. Tell us what you make and how many you need.

Yes. If your design is patented or commercially sensitive, we are happy to work under a non-disclosure agreement, and we won’t reproduce your design for other customers unless you agree.

No. Many of our customers are in Nottingham and the East Midlands, but because every job starts from a file, a drawing or photos, we work with businesses across the UK and send the finished parts to them.

Business Hours